Chapter 1 Preparation of Embroidery Machine
BES-916AC • BES-1216AC
20
3-2 Installation of Machine
1.
Adjust leveling seats
q
by turning nuts
w
in the direction of the arrow until the table
top is placed horizontally.
2.
If the table is not stable, loosen nuts
w
and
turn leveling seats
q
for adjustment.
When relocating the machine, raise leveling seats
q
.
The machine can then be moved with casters
e
.
Embroidery machines should be installed only
by trained engineers.
Electric wiring should be laid by your distribu-
tor or electric experts.
The sewing machine weighs more than 195 kg.
The installation should be carried out by two or
more people.
Do not connect the power source until installa-
tion is completed. Doing so may start the ma-
chine unintentionally through an accidental
activation of the START switch, resulting in
bodily injuries.
Install a machine in a place away from a high-
frequency welding machine or other machines
that may generate a strong electric noise. Fail-
ure to do so may cause the embroidery machine
to malfunction.
Be sure to connect the ground. If the ground
connection is not secure, you run a high risk of
receiving a serious electric shock, and problems
with correct operation may also occur.
Secure the machine with the nuts when install-
ing it so that it will not move by placing the lev-
eling seat on the sound floor.
3. Installation
* After installation is completed, get the power supply from a dedicated outlet.
* When connecting multiple machines, exercise care not to exceed the capacity of the outlet.
3-1 Transportation of Machine
When relocating the machine, lift it by the steel frame.
Note) Never lift the machine by the table or the guard bar.
DANGER
w
e
q
Summary of Contents for BES-1216AC
