4/8/05
6
Monthly Maintenance
Greasing
Cam grooves continued
5. Unscrew the lower screw [2] and loosen the upper
fixing screw [3]. Remove the head front covers L
[1].
6. Unscrew the two adjusting bolts [4] and detach the
jump part stepping motors [5].
7. Grease the cam groove of the work clamp cams.
8. Attach the jump part stepping motors [5] and
tentatively tighten the adjusting bolts [4].
9. Adjust the position of the jump part stepping
motors [5] so that the roller [7] of the jump lever
assembly, just touches the jump part [6]. Then
fully tighten the bolts [4]. Adjust the roller [7] not
to push on the jump part [6] but just touches it.
10. Attach the head covers front L [1].
For Technical Assistance Please Call Toll Fre e
1-877-4BROTHER
Email:
Website
:
http://www.brother-usa.com/industembroidery/tech_down.aspx
B
B
E
E
-
-
1
1
2
2
0
0
4
4
,
,
1
1
2
2
0
0
6
6
1
2
3
5
4
5
7
6
