4/8/05
1
Daily Maintenance
e
li
Cl anin
g
Oi ng
Rotary hook
1. Open bobbin case covers and remove bobbin
cases. Use brush to remove lint build up in and
around rotary hooks. Compressed air may also
be used.
2. Insert bobbin cases in to rotary hooks. Make
sure bobbin thread is not over 2 inches long.
Close bobbin case covers.
Rotary hook
1. Remove rubber dust plug from the left hand end of
machine and insert the red 4mm T-handle wrench.
Turn degree wheel in the opposite direction of the
arrow to 50 degrees.
2. Open bobbin case covers and insert one drop of oil
to the rotary hook raceways. Oil raceways at the
beginning and every 3-4 hours of operation.
3. Close bobbin case covers.
4. Rotate degree wheel in the direction of the arrow
back to stop position (100 degrees). Remove T-
handle wrench and re-install rubber dust plug.
For Technical Assistance Please Call Toll Fre e
1-877-4BROTHER
Email:
Website
:
http://www.brother-usa.com/industembroidery/tech_down.aspx
B
B
E
E
-
-
1
1
2
2
0
0
4
4
,
,
1
1
2
2
0
0
6
6
