6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
BAS-311H
47
6-5. Resetting all settings to their defaults
If the sewing machine stops operating normally, the cause may be that an incorrect setting may have been made for the memory
data by means of memory switches, for instance. In such cases, it may be possible to restore normal operation by following the
steps given below to initialize the memory setting data.
Change to initialization mode.
(While pressing the RESET key, press the power ON
switch.)
‘1’ will be displayed in the PROGRAM No. display, and ‘ALL’ will
be displayed in the menu display.
1
[Reference]
If the or key (1) is pressed at this time, you can select the items to be initialized
as shown below.
* For details on initialization items other than “ALL”, contact the place of purchase.
PROGRAM
No. display
Main display
Initialization item
1
「
ALL
」
All data in memory is cleared or initialized.
2
「
MEM
」
Memory switch settings are initialized.
3
「
SEW
」
All sewing programs or individual programs
are cleared.
4
「
USE
」
User program sewing conditions are
initialized.
Cycle programs are initialized.
* To clear individual programs, press the
or
key to select the
program number.
2
Press the ENTER key for two seconds or more.
• The menu display will change to illuminated and initialization will then be
complete.
2414B
3
Press the TEST key.
2404B
3107B
3108B 2382B 2383B
