Brother ArtCity140 Service Manual Download Page 62

Page: 62 / 151

Application of

Disassembly

3 - 4

Main frame and Covers

Application o

Disassembly

Application of

Disassembly

Disassembly of Rear cover assy

1. Remove the spool pin from the rear cover while pulling the spool pin spring.

2. Remove the spool pin spring from the rear cover.

3. Remove the spool pin stand from the rear cover.

4. Remove the screw (taptite, pan P (S/P W) 3X12) to remove the bobbin presser from the rear cover.

5. Remove the screw (taptite, cup P M4X20) to remove the thread guide assy from the rear cover.

Taptite, Cup P M4X20

Taptite, Pan P (S/P W) 3X12

Taptite, pan P (S/P W) 3X12

Thread guide assy

Taptite, cup P M4X20

Bobbin presser

Spool pin spring

Spool pin stand

Spool pin spring

Positioning groove

Spool pin

Rear cover

Summary of Contents for ArtCity140
























































































































































Search results

Summary of Contents for ArtCity140

Reviews:

Related manuals for ArtCity140

Brands by name

Popular brands

Brother ArtCity140, Service Manual

Search results

Summary of Contents for ArtCity140

Reviews:

Related manuals for ArtCity140

Brands by name

Popular brands