Brother AE2700, Service Manual

Page: 151 / 205

3 - 79
Main frame and Covers Application of Assembly
Application Application
1
Assembly of Rear cover assy
1-1 Attachment of Thread guide assy
1. Set the thread guide assy
1
to the rear cover assy, and then tighten the
screw
1
temporarily.
*Key point
• Fully tighten the screw
1
after performing "4-41 Adjustment:
Bobbin winder" .
1
1
1
Taptite, Bind B
M4X10
1-2 Attachment of Bobbin presser
1. Set the bobbin presser
1
to the rear cover assy, and then tighten the screw
1
temporarily.
*Key point
• Place the bobbin presser
1
with the smaller end facing the
rear.
• Fully tighten the screw
1
after performing "4-41 Adjustment:
Bobbin winder" .
1
1
1
Taptite, Pan P (S/P W)
M3X12
1-3 Attachment of Spool pin
1. Set the spool pin spring
1
to the positioning groove of the rear cover assy.
2. Insert the spool pin
2
into the positioning hole of the rear cover assy while
pulling the spool pin spring
1
.
2
1
2