Brother AE2700, Service Manual

Page: 110 / 205

3 - 38
Upper shaft, Needle bar and Presser foot unit Application of Disassembly
Application Application
„ Type B
1. Remove the spring from the plate
1
and the base holder assy.
2. Remove the needle bar supporter assy
2
from the shaft bushing
3
of the
base holder assy.
3. Remove the screw
1
, and then remove the plate
1
from the needle bar
supporter assy
2
.
4. Remove the screw
2
, and then pull out the shaft
4
to remove the needle
bar supporter shaft
5
from the needle bar supporter assy
2
.
<In case of Type A, refer to previous page.>
S09
1
5
1
2
2
2
3
4
1
S09
2-14 Removal of Presser foot lifter
1. Remove the retaining ring E4
1
, and then remove the presser foot lifter
2
from the shaft of base holder assy.
1
2