Brother 893-Z11 Operation Manual Download

Page: 93 / 128

Click

in the upper-right corner of the screen.



The page for managing your account appears.

Click “Machine(s) Registration”.

Click “Register a New Machine”.

Note

•

If the maximum amount of registered machines
has been reached, select the registered
machine that you are not using and click
“Remove” in the “Registered Machine
Information” screen, and then register the new
machine.

Type in your machine number, and then click
the “OK” button.

Memo

• Your machine number appears on your

machine in the screen shown in step

describing how to obtain the PIN code.



A four-digit PIN code appears in the screen.

[MACHINE]

Touch the “OK” key.



The PIN code input screen appears.

Type in the four-digit PIN code that appeared
in the CanvasWorkspace screen, and then
touch the “OK” key.



The following screen appears.

Summary of Contents for 893-Z11

































































































































Search results

Summary of Contents for 893-Z11

Reviews:

Related manuals for 893-Z11

Brands by name

Popular brands

Brother 893-Z11, Operation Manual

Search results

Summary of Contents for 893-Z11

Reviews:

Related manuals for 893-Z11

Brands by name

Popular brands