76
UTILITY STITCHES
—————————————————————————————————————————————————————————————————————————————————————————————————————
Selecting characters
■
Selecting a character
[Example] Selecting stitch “C” (No. 03).
a
Turn on the sewing machine.
b
<For models equipped with 1 font type of
character stitches>
Press the stitch category selection key twice
and confirm that the character stitch indicator
lights up.
a
Stitch category selection key
b
Character stitch indicator
<For models equipped with 2 font types of
character stitches>
Press the character stitch key once or more
and confirm that the desired font type of
character stitch indicator is lit.
a
Character stitch key
b
Character stitch indicator (Gothic font)
c
Character stitch indicator (Script font)
Memo
●
When you select a character, check that
there are no characters in memory.
a
This indicator shows that no character is stored.
If there are any characters in memory,
delete them. (For details, refer to “Deleting
characters” (page 79).)
c
Press
(stitch selection keys) to select
pattern No. 03.
• For details, refer to step
c
of “Selecting a
stitch” (page 39).
d
Press the “+” side of
(stitch width
adjustment key) to enter the selected
character.
a
Stitch width adjustment key
X
The following display is shown on the
LCD.
a
Selected pattern No.
b
The position of the selected pattern No.
c
The total number of entered characters
e
Attach the presser foot indicated on the LCD.
a
The presser foot to use
• For details, refer to “Replacing the presser
foot” (page 36).
f
If you would like to only sew this single
character, start sewing.
If you would like to sew a sequence of
characters, see the following procedure.
• For details on sewing characters, refer to
“Sewing the character stitches” (page 79).
