Brother Industries DCP-T520W Online User'S Manual Download Page 61

Page: 61 / 501

Home >

Paper Handling

Load Documents

> Load Documents in the Automatic Document Feeder (ADF)

Load Documents in the Automatic Document Feeder (ADF)

Related Models

: DCP-T720DW/DCP-T725DW/DCP-T820DW/DCP-T825DW/MFC-T920DW/MFC-T925DW

The ADF can hold multiple pages and feeds each sheet individually.

Use paper that is within the sizes and weights shown in the table. Always fan the pages before placing them in
the ADF.

Document Sizes and Weights

Length

5.8 to 14.0 in. (148 to 355.6 mm)

Width:

5.8 to 8.5 in. (148 to 215.9 mm)

Paper Weight:

17 to 24 lb (64 to 90 g/m²)

Documents that are longer than 11.7 in. (297 mm) must be fed one page at a time.

IMPORTANT

•

DO NOT pull on the document while it is feeding.

•

DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper clipped, pasted or taped.

•

DO NOT use cardboard, newspaper or fabric.

•

Make sure documents with correction fluid or written in ink are completely dry.

1. Lift and unfold the ADF document support (1).

2. Fan the stack of paper well to avoid paper jams and misfeeds.
3. Adjust the paper guides (1) to fit the document size.

4. Place your document,

face down

top edge first

in the ADF underneath the paper guides until you feel the

document touch the feed rollers and the LCD displays

[ADF Ready]

IMPORTANT

DO NOT leave any documents on the scanner glass. If you do this, the ADF may jam.

Summary of Contents for DCP-T520W





















































































































































































































































































































































































































































































































Search results

Summary of Contents for DCP-T520W

Reviews:

Brands by name

Popular brands

Brother Industries DCP-T520W, Online User'S Manual

Search results

Summary of Contents for DCP-T520W

Reviews:

Brands by name

Popular brands