PHOENIX BF-BM4-LS
Issue 1
3
Introduction
May we take this opportunity to thank you for choosing one of our stoves.
These appliances are designed to burn wood logs and wood derived fuels. It is essential
that your wood has been seasoned to ensure that it is sufficiently dry for burning. You can
determine the moisture content of your logs by using a digital moisture meter, your logs
need to be below 20% moisture content before they are considered dry enough for
burning.
Never burn wood that contains paint, glue or any other chemicals
See the section “Lighting the Stove” for further details. After reading this document, if there
is anything you are unsure about, please contact your dealer or our Technical Support
Department.
These instructions cover the basic principles to ensure the satisfactory installation of the
stove, although detail may need slight modification to suit particular local site conditions. In
all cases the installation must comply with current Building Regulations, Local Authority
By-laws and other specifications or regulations as they affect the installation of the stove.
It should be noted that the Building Regulations requirements may be met by adopting the
relevant recommendations given in British Standards BS 8303 and BS EN 15287-1 2007 +
A1 2010 as an alternative means to achieve an equivalent level of performance to that
obtained following the guidance given in Approved Document J.
Please note that it is a requirement under the Broseley Fires warranty system that the
installation of the stove is carried out by a Competent Person registered with a
Government approved Competent Persons Scheme. HETAS Ltd operate such a Scheme
and a listing of their Registered Competent Persons can be found on their website at
www.hetas.co.uk
.
Packing List
1x
Steel
Bodied
Stove
1x
Spigot
2x Rear Firebrick
1x Steel Ashpan
2x
Side
Firebricks
1x
Grate
4x
Baffle
1x
Glove
4x Base Firebricks (surrounding the grate)
All parts will be inside the main stove body upon delivery.
