© 2007-2008 Broseley Fires Ltd 11
20.
INSTALLATION OF THE APPLIANCE
THIS APPLIANCE MUST BE INSTALLED AND COMMISSIONED BY A FULLY QUALIFIED, REGISTERED ENGINEER.
The guarantee is void if any part of the installation is found to be illegal.
Because of nature of this type of appliance, it is not possible to give step by step fitting instructions for the
appliance. Please read the following advice before starting any work and make the necessary pre-installation
checks.
21 FLUE
REQUIREMENTS
This appliance has a European sized flue collar that is metric in size. An adaptor is required for the initial
connection to the flue collar. A standard (imperial sized) adaptor with a crimped leading edge will allow the flue to
fit inside the flue collar of the Inserto 80 & Inserto 100.. Please refer to
the diagrams and tables below for further
details.
The technical drawing of the ‘
MAIN FLUE COLLAR
’ is shown below in
FIG. 5
FIG. 5
The diameter of the ‘
ADDITIONAL WARM AIR VENTS
’ is shown below in
FIG. 6 (below)
FIG. 6
MAIN FLUE COLLAR
FIG. 7 STOVE PIPE CONNECTIONS
INSERTO
ØA
ØB
ØC
50
130
122
118
80
160
151
148
100
160
151
148
INSERTO
ØA
ØB
ØC
50
OPTION NOT AVAILABLE
80
150
--
140
100
150
--
140
