Align a leg
(A)
so that the screw slots are overlapping.
Fit a spacer
(D)
followed by a washer
(C)
to a bolt
(B)
and fit it into one of the screw holes. Repeat for the
second screw to fit the leg onto the body of the chair.
Turn the bolt with the allen key
(E)
until it is secure
but do not tighten yet.
Repeat for all four legs.
Step 1
D x 8
C x 8
B x 8
A x 4
E x 1
Step 2
Lift the chair off the ground and turn it right side up
while being careful not to put any pressure on the
legs while you turn the chair.
A
B
D
C
E
