K x12
Step 11
Align the side walls of the draw to the back wall and fit
together tightly with screws
(K)
. Repeat for the
remaining draws.
D x 3
E x 3
F x 6
W x 3
K
Slide the base of the draw into place by fitting it into the
grooves in the walls of the draw. Insert a dowel
(F)
into
the outer two holes of the support panel and a cam
screw
(D)
in the middle hole. Firmly press it into place
along the bottom of the draw. Insert a cam lock
(E)
in
the corresponding hole followed by a plastic cap
(W)
.
Repeat for the other two draws.
Step 12
D
F
E
W
