BROSA Haim Clothes Rack Assembly Manual Download Page 9

User Recommendation

Assembly
1. Assemble furniture using our Assembly Guides. You can find them at 
support.brosa.com
2. Do not dispose of any packaging or contents of the shipping carton 
until assembly is completed to avoid accidentally discarding small 
parts or hardware. 
 
Placement
1. Keep furniture on flat, level ground. Placing it unevenly may cause 
deformation.
2. Do not hang heavy objects on furniture.
3. When repositioning furniture: lift, don’t drag.
4. Keep sharp objects away.

Cleaning and Maintenance
1. Clean furniture regularly with a white soft cloth. Slightly damp fabrics 
help absorb dust, but ensure you dry it once you’re done.
2. Clean spills and stains immediately with a clean cloth. Nail polish 
and nail polish remover can erode furniture. Dab don’t rub these stains.
3. Take care when using pens or markers on furniture. Keep liquids 
away as they may damage the finishing. 
4. Avoid harsh cleaning chemicals such as alcohol or gasoline 
solvents. Avoid using sponges or dirty cloths.
5. Cover furniture that isn’t being used to protect from dust and 
ageing.
6. Re-tighten screws and attachments when they loosen.

Exposure
1. Keep furniture away from intense direct sunlight. Exposure can cause 
cracks or discolouration.
2. Severe changes in temperature and humidity can accelerate ageing. 
Keep furniture at least 50cm from heat or air conditioning.

Summary of Contents for Haim Clothes Rack










Reviews: