Step 5
5.1
Unfold the slat set
(5)
to make a full size slat set.
5.2
Place the slat set on a level surface, making sure
the underside is facing you.
5.3
Fit a flat washer
(B)
to a bolt
(A)
. Insert the bolt
into the hole on the side face of the middle metal
bar, making sure it protrudes from the other side.
Fit a flat washer
(B)
and then a nut
(C)
to the bolt
protruding from the other side and tighten with the
spanner
(D)
.
Repeat for the other hole on the middle metal bar.
A x 2
B x 4
C x 2
Step 5.1
Step 5.2
Step 5.3
D x 1
5
A
B
B
C
D
