background image

7. Use protective coasters and mats for hot items on the furniture.
8. Keep furniture away from intense direct sunlight. Exposure can 
cause cracks or discolouration.
9. Severe changes in temperature and humidity can accelerate ageing. 
Keep furniture at least 60cm from heating or air conditioning.
10. Do not place furniture near open flames.

Rattan Cleaning and Maintenance
1. Clean rattan surfaces regularly. A monthly or even weekly cleaning 
helps prevent dust from building up in crevices.
2. Use a vacuum with the brush attachment to remove loose dust and 
debris from the crevices and cracks. 
3. Use a toothbrush, cocktail stick or any other fine tool to remove 
stubborn soil or debris.
4. Humidity may cause rattan webbing to go loose and bulge slightly. It 
will eventually dry tight. Should the rattan webbing stay loose and look 
stretched, wet the webbing with a damp cloth and dry out the piece in 
a well-ventilated area. It helps restore the tightness.
5. If mildew or mould forms, mix bleach with water and use a scrub 
brush to clean the affected area. Try not to saturate the rattan. Wipe 
down the area with a fresh damp cloth to remove any bleach residue. 
Allow the furniture to air dry. 
6. Leaving the rattan webbing in its natural state allows the material to 
breathe and gives maximum longevity.  
7. Applying some linseed oil helps nourish rattan.
8. Occasionally inspect the rattan surface to identify any splinters or 
broken webbing. Remove the splinters immediately to avoid any 
injuries. If the breakage is significant, seek further advice by contacting 
us directly.

Summary of Contents for Caledonia Rattan Compact Chest of Drawers



















Reviews: