Adjusting Time Manually
Some people like to set their clocks fast to make sure that they will always be
on time. Even though the SmartSet
®
Clock Radio sets the time by itself, you
still have the option of adjusting the time manually.
To manually adjust the time display, press and hold TIME, and press either UP
or DOWN to adjust the time display ahead or back as desired. Each press of
UP or DOWN will change the display by one minute. If you hold UP or DOWN,
the display will continue to change. The display will change slowly at first,
one minute at a time. But if you continue holding UP or DOWN, the display
will change rapidly.
Note:
If you manually adjust the time, your new setting is entered into the
SmartSet
®
memory. If the power is interrupted, the display will return to your
new setting, not the original setting, when the power is restored.
Adjusting Wake-Up Times
This clock radio has two separate alarms that can be set and used
independently. You may use the alarms to wake two people at different
times, or you may use one alarm for weekdays and the other for weekend
wake-up times. The procedure for adjusting the wake-up time is the same for
both Alarm 1 and Alarm 2.
1. Press and hold either ALARM 1 or ALARM 2. The display will change from
the correct time to the Alarm 1 or Alarm 2 wake-up time.
2. While holding ALARM 1 or ALARM 2, press either UP or DOWN to move the
display ahead or back to your desired wake-up time.
291070 SmartSet Clock Radio Instructions Doc. Size: 5"W x 4.75"H
Output at 100% Prints 1/0 Black
15
LOCATION OF CONTROLS AND INDICATORS
10
12
14
13
18
19
20
1
11
26
27
2
3
4
10
9
5
6
7
8
17
21
22
25
23
24
16
15
291070_INS_SmartsetCloRad NEWT 10/3/02 9:38 AM Page 19
