manualshive.com logo in svg

Brookstone SMARTSET 467522, Manual, Page: 53 / 58

Share
Download
Brookstone SMARTSET 467522 Manual Download Page 53

8. After you set the time, reconfirm that the Day, and Month/Date

displays are still correct. Make final adjustments if necessary.
The SmartSet® clock memory is now reset and the new 
lithium battery will maintain it for the next five to eight years,
depending on the number and duration of the power outages
you experience.

Important Note

After resetting the clock, don’t forget to reset your wake up times,
and alarm mode settings, and sleep timer settings as well.

CARE AND MAINTENANCE

Lithium Battery Precautions

•

Dispose of the old battery properly. Do not leave it lying around
where a child or pet could play with, or swallow it. If the battery 
is swallowed, contact a physician immediately.

•

Battery may explode if mistreated. Do not attempt to recharge 
it or disassemble it. Do not dispose of the old battery in a fire.

467522_INS_Smar

tS

et CD Alarm Clock

5"W x 4.75"H

Output at 100% P

rints 1/0 Black 

53

467522_INS_SmartSet CD Alarm  3/22/07  9:25 AM  Page 54

Summary of Contents for SMARTSET 467522



























































Reviews:

No comments