10
11
OPERATION
TURNING THE UNIT ON/OFF
1 .
Insert the power cord into an AC 120V 60Hz electrical outlet .
NOTE: To reduce the risk of electric shock, this product has a polarized plug
(one blade is wider than the other) . As a safety feature, this plug will fit in a
polarized outlet only one way . If the plug does not fit fully in the outlet, reverse
the plug . If it still does not fit, contact a qualified electrician to install the proper
outlet . Do not alter the plug in any way .
2 . Place the unit on a chair . Optionally, use the chair strap to secure the unit to
the chair .
3 . Press on the controller to turn the unit on .
4 .
Press again to turn the unit off .
NOTE: The unit shuts off automatically after approximately 20 minutes .
USING THE MASSAGE ZONES
The unit has two dual-headed massage nodes that span three massage zones:
FULL, UPPER and LOWER . Select a zone by pressing the ZONE button until the
white indicator light reaches your desired massage zone .
USING THE MASSAGE THERAPY PROGRAMS
The unit has three massage therapy programs . Select your desired program by
pressing the corresponding button on the controller:
• AUTO — A pre-programmed, full-back massage that features both Rolling and
Shiatsu massage .
• ROLLING — Soothes the massage zone of your choice with a steady, up-and-
down rolling motion . Use with the ADJUST button to select roller width .
• SHIATSU — Delivers a rolling, rotating massage to the zone of your choice .
Press the SHIATSU button until the white indicator light reaches your desired
rotational direction . (Note: You cannot alter the width of the rollers in the
SHIATSU program .) Press the TARGET button to focus your massage on a
specific area . Press TARGET again or choose the AUTO or ROLLING program
to move the nodes .
ADJUST
Press the ADJUST button to adjust the width of the rollers on either side of your
spine . Not available with the SHIATSU program .
HEAT
Press the HEAT button to add soothing heat to your massage . Note: The heat
function cannot be used independently . It is only functional during the massage
programs .
CARE AND MAINTENANCE
• Unplug the unit and wipe it with a soft, damp cloth .
• Do not use abrasive cleaning agents, solvents or harsh detergents .
• Store the unit in a safe, cool and dry place when not in use .
• Use the chair strap to secure the seat cushion to the seat back for storage .
• Do not place the unit in any type of liquid .
• Do not attempt to repair this massager . There are no user-serviceable parts .
