SETTING UP THE BROOKSTONE REACT™ MASSAGE CHAIR
(continued)
Positioning the Chair
•
Allow sufficient space around the chair – at least 6
inches behind the chair.
•
Place on a dry, level surface.
•
Be sure that the power cord is not placed
under the chair to prevent damage.
Caution
Caution
NOTE
• It is recommended that a carpet be placed under the Massage Chair to prevent scratching
the floor and to reduce noise level during operation.
• As the Massage Chair is heavy, please exercise extra care not to damage the floor when
positioning it.
• Maintain a minimum distance of 4 feet from AV devices, such as a TV or radio, to prevent
signal interference.
• Use the Massage Chair only when it is placed on an flat surface.
Moving the ReAct™ Massage Chair
• Hold the back of the Massage Chair
and tilt the chair to approximately a
45° angle.
• Use the casters on the bottom of the chair
to roll it to the desired location.
• Gently lower the chair to a flat surface.
• Do not move the Massage Chair when
there is someone sitting on it. This will
cause the Massage Chair to tip over
resulting in accidents or injuries.
The zippers located on both sides of the
backrest should not be unzipped. Doing
so will void the warranty.
11
