SPEAKER OPERATION
CHARGING THE SPEAKERS
Charging time is approximately 10 hours.
1. Insert one end of the CHARGING BASE POWER ADAPTER into the
CHARGING BASE’s cord and the other end into an electrical outlet.
2. Place the SPEAKER BOTTOM on the CHARGING BASE. A red indicator light
illuminates inside the speaker.
USING THE SPEAKERS
You can leave the speakers connected to the CHARGING BASE, or you can
remove them and use the rechargeable battery power.
1. Turn on the power to your audio source.
Note:
•
If the transmitter is connected to your audio source’s variable-level
output jacks, you may adjust the volume on your audio source.
If the transmitter is connected to your audio source’s fixed-level output
jacks, no volume adjustment is needed.
Note:
• If there are no fixed-level audio outputs on your audio source, connect
the DUAL RCA CABLE to variable-level (HI-FI) audio outputs or refer to
Headphone Jack
for Y ADAPTER 3.5MM CABLE connection instructions.
• Do not connect the DUAL RCA CABLE to speaker terminals on your audio
source. This may damage the transmitter or your audio source.
HEADPHONE JACK
1. Insert one end of the TRANSMITTER POWER ADAPTER into
DC 9V
on the transmitter and the other end into an electrical outlet.
2. Insert one end of the DUAL RCA CABLE into the appropriately colored R/L
LINE IN jacks on the transmitter and the other end into the appropriately
colored ends of the Y ADAPTER 3.5MM CABLE.
3. Insert the 1/8” single end of the Y ADAPTER 3.5MM CABLE into your audio
source’s headphone jack.
Note:
If your audio source requires a 1/4” headphone plug, you will need a
1/4” adapter (not included).
9
8
