SPECIFICATIONS
Power Output: 3W
DC Input: 5V 500mA
Range: Class 2, up to 33 ft (10m)
Battery Capacity: 3.7V 800mAh
Charging Time: Approx. 2 hours
Battery Life: Approx. 5 hours
Compatibility: Bluetooth 2.0 or above
device with A2DP/AVRCP/HFP/HSP
Fold
Fold
Fold
Fold
Fold
The Bluetooth
®
word mark and logos
are registered trademarks owned of
Bluetooth SIG, Inc. and any use
of such marks by Brookstone is under
license.
Store the speaker in a cool, dry place.
1. When you have an incoming call,
the speaker sounds an incoming
call tone. Both the speaker and your
cellphone may ring, depending on
your cellphone settings.
2. To answer an incoming call, short
press Play/Pause Button to answer
the call.
3. To reject an incoming call, long
press Play/Pause Button to reject
the call.
4. To end a call, short press
Play/Pause Button once.
5. If, while you are listening to music,
your phone rings and you answer
the call, the music selection will
then continue from where it had
stopped after you end the call.
NOTES:
LISTENING TO YOUR AUDIO
DEVICE
1. Play your audio device as you
normally would.
2. Volume may be adjusted on your
audio device or by pressing and
holding the Volume Up or Down
buttons on the speaker.
3. A single press of the Volume Up
or Down buttons will advance to
the next track or go back to the
previous track.
4. To pause audio, press the Play/Pause
Button on the Speaker. To resume
audio playback, press the Play/Pause
Button again.
PLAYING MUSIC THROUGH A
WIRED CONNECTION
You can connect your audio device to
the speaker with a 3.5mm audio cable
(not included).
1. Plug one end of the cable into your
audio device, just like you would a
pair of headphones.
2. Plug the other end of the cable into
the speaker's AUX-IN port.
3. Use your audio device to control
music playback and volume
through speaker.
WATER-RESISTANT
1. Pack Speaker is compliant with
IPX4 waterproof standard “splash
proof in all directions.”
2. Never place the speaker under
running water or submerge
the speaker in water.
3. Once the speaker is in pairing mode
and your device is ready to pair,
select ‘Pack Speaker.’ If prompted,
use 0000 as a PIN for the pairing
code. Once the speaker is selected,
LED indicator will change to solid
blue to complete pairing.
.
1. If pairing is not successful, turn
the speaker off and on again.
2. After successful pairing, paired
devices will remember each other.
3. The AUX-IN will take priority over
Bluetooth
®
. Bluetooth
®
connection
is disconnected when AUX-IN is
plugged in. Bluetooth
®
will be
reconnected when AUX-IN is
unplugged.
CARE AND STORAGE
MOBILE PHONE OPERATION
