9
How to Transport or Move the Chair
Before moving the chair, turn off the main power, disconnect the power plug from the wall outlet and
disconnect the power cord connector from the power connector.
z
The chair is very heavy, so be sure to wear appropriate gloves when transporting or moving the chair to
prevent it from being dropped or an injury from occurring.
z
The chair is very heavy, so be careful not to hurt your lower back when transporting or moving it.
z
The remote control is attached to the chair, so make sure that it does not fall when moving the chair.
Caution
z
Do not move the chair while someone is in it.
z
Before moving the chair, disconnect the power cord from the wall outlet, and also disconnect the power cord
connector from the power connector.
→
The power cord may be damaged, resulting in fire or electric shock.
To Move with the Wheels
To Carry
Raise the reclining seat back to its upright position,
hold the sides of the footrest, and then move the
chair on the wheels by lifting and holding up the
front part of the chair.
Fully recline the seat back and carry the chair by
holding the handle on the upper part of the back
cover and the sides of the footrest.
Wheels
Hold the Handle
Hold the Handle
Hold the Handle
Open the zipper
There is a risk of damaging the floor surface, so
lay down mats or take other protective measures
before moving the chair.
Hold the chair firmly, or the chair may fall and
damage the floor or cause an injury.
Caution!
If the passageway
clearance is 34 inches or
less, the chair cannot be
moved using the normal
method.
Power
①
First, plug the power cord
connector into the power
connector located at the
back left of the chair.
Then, plug the other end
of the cord into the wall
outlet.
②
Turn on the main
power switch
located at the back
left of the chair.
ON
OFF
* If the main power switch is turned on while the rollers are stopped partway, they will automatically return to the storage position (upper
part of the seat back) and then stop.
[P
R
E
P
A
R
A
T
IO
N
B
E
F
O
R
E U
S
E
]
Warning
z
Do not use with any type of transformer device.
→
May result in damage to the chair or electric shock.
z
Ensure the power cord is not placed under the chair.
Caution
z
Before plugging the power plug into the wall outlet, make sure that the main power switch is off.
z
Make sure that the plug on the power cord is inserted fully into the wall outlet.
z
Before using the chair for the first time, turn on all the switches in order as indicated in this Operating Manual to
check that the chair is operating properly.
z
Use a high-quality surge protector with your massage chair. Failure to do so voids the manufacturer warranty on
your chair. An appropriate high-quality surge protector can be purchased online at www.InadaUSA.com.
Summary of Contents for INADA Signature HCP-S8900A
Page 2: ......
