Brookstone iConvert, User Manual, Page: 25 / 44

select > cursor to end
- Selects from the cursor position to the end of the
selected tracks .
find Zero crossings
- Modifies the selection slightly so that both the left and right
edge of the selection appear on a positive-slope zero crossing . This makes it easier
to cut and paste audio without resulting in an audible clicking sound .
selection save
- Remembers the current selection (or cursor position), allowing
you to restore it later .
selection Restore
- Restores the cursor position to the last position saved by
“Selection Save .”
Move cursor > to Track start
- Moves the cursor to the start of the current track .
Move cursor > to Track end
- Moves the cursor to the end of the currently
selected track .
Move cursor > to selection start
- Moves the cursor to the start of the
current selection .
Move cursor > to selection end
- Moves the cursor to the end of the
current selection .
snap-To > snap on
- Enables “Snap-To” mode . When “Snap-To” mode is enabled,
the selection will be constrained to the nearest interval on the time scale, by default
the nearest second . So if you click and drag from 4 .2 seconds to 9 .8 seconds, it will
result in a selection from 4 seconds to 10 seconds, exactly . You can change the units
that are snapped to using the “Set Selection Format” option in the View Menu .
snap-To > snap off
- Turns “Snap-To” mode off letting you select arbitrary
ranges of time .
Preferences
- Opens the “Preferences” dialog .
24