11
chaRGInG The PRojecToR
1 . The Projector is charged using the included AC Adapter .
2 . The LED Indicator Light will illuminate Red to indicate the Projector
is currently charging and then revert to Green when the Projector is
fully charged .
Important: Fully charge the Projector internal battery before first use
(approximately 3 to 5 hours). the approximate run-time is 2 hours.
3 . A low battery icon will show on the screen when the Projector battery
is low . Use the included AC Adapter to charge your Projector . If the
battery is too low, the projector will automatically shut off .
seT UP
1 . Connect one end of the AC adapter to the Projector 12V port and plug
the other end into an electrical outlet .
2 . Connect the HDMI cable (included) to the HDMI port and the other
end to your device .
Note: You may need an adapter to connect your device to the HdMI cable.
Important! apple
®
devices require an apple digital aV adapter (sold separately)
for HdMI use. For all other devices, check the manufacturer
’
s instructions.
additional adapter specific to your device may be required (e.g. Micro/Mini HdMI).
3 . Connect a speaker to the 3 .5mm audio out jack, if desired .
