11
operating the remote
PAiRing THE REMOTE
The projector is primarily controlled through the included remote.
To pair the remote:
important:
The distance between the remote and the projector
should be 6.5 feet or less.
1. Plug the power cord into the projector and the other end into
a wall outlet.
2. Power the projector on by pressing the on/off button on the
projector. Allow the projector a moment to startup
3. Install the (2) included AAA batteries in the remote control.
•
Turn the remote control over and lcoate the battery door on
the rear of the unit.
•
Press on the arrow on the remote door and slide in the
direction indicated by the arrow.
•
Insert batteries negative (-) side first into the slots, pushing
the battery into the coil and then into the compartment.
important:
Do not insert batteries positive (+) side first.
