18
important:
Before you power on the projector, please be sure
to check that there is nothing blocking the ambient light sensor on
the front of the projector (the location of this sensor can be seen
in Locations and Parts diagram on page 8). Blocking this sensor
may impact the IntelliBright adjustments the projector makes which
optimizes the projected image.
WIRED CONNECTION
1. To connect via a wired connection, plug in the HDMI
compatible cable (included in the box) to the HDMI
compatible port on the projector and to your device.
note:
Some devices may require an adapter to connect to your
device.
To d
etermine what type of adapter you need to use, please
reference the Compatibility section of this manual.
2. Power on the projector by pressing and holding the power
button for 3 seconds.
3. Allow the projector 15 to 30 seconds to fully start up, sync
with your device and make image adjustments.
note:
After syncing with the projector, you may see your device’s
screen being mirrored by the projector. Some devices may not have
this ability, but they can still be used with the projector to project
videos, and photo slide shows.
