Brookstone 799667, User Manual, Page: 9 / 24

8
seTTIng The scan mode
1 . Turn the Scanner on by pressing the POWER/SCAN button .
2 . By pressing the COLOR/MONO button, you may choose between
Color and Mono .
3 . The Color or Mono icon will be displayed on the LCD screen to reflect
your choice .
scannIng
To scan, make sure your Scanner is not connected to the computer or in Wi-Fi mode .
1 . With a microSD card inserted into the Scanner, turn the Scanner on by
pressing the POWER/SCAN button for two seconds .
2 . Hold the document you wish to scan securely on a flat surface .
3 . Place the Scanner flat against the document, scanning screen side down,
making sure the info you want to scan is between the SCAN GUIDES .
4 . Press the POWER/SCAN button once . The green SCAN LED INDICATOR
light will illuminate to show the Scanner is scanning .
5 . Roll the Scanner over the document you wish to scan, slowly and evenly .
This will allow you to get the best quality scan possible .
6 . When you reach the end of the document, press the POWER/SCAN button
again to stop scanning .
7 . The COUNTING INDICATOR on the LCD screen will tell you the number
of saved scans you have completed .
79
96
67
_I
N
S
_W
iF
i S
ca
nn
er
_S
iz
e:
5”
W
x4
.7
5”
H
_O
ut
pu
t:1
00
%
_P
rin
ts
:1
/1
,B
lk