the change in settings will be shown on the Virtual Keyboard
screen . sensitivity
can also be adjusted through the menu . please see the menu system for details
on adjusting brightness using the menu .
Setting Number 1 Low Sensitivity
- should be used for high light conditions .
Setting Number 2 Normal Sensitivity
- should be used for normal lighting
conditions .
Setting Number 3 High Sensitivity
- should be used for painted finger nails or
where keystrokes are not being detected .
KeYboard tYpinG Modes
there are two keyboard modes available:
1. All Up Mode
factory default keyboard mode is “all up .” this means that all fingers need to be
raised above the virtual keys in order to type . palms can rest behind the keyboard,
but all fingers should be high enough so that accidental key presses are not
recognized (generally at least 4mm above the table surface) . “all” will be displayed
on the Virtual Keyboard screen when in this typing mode .
note: if 3 or more fingers are detected at once, a buzzing sound will occur to let
you know your fingers are too low .
remember: do not put your fingers on the home row . they must hover at least
4mm above the surface until you want to want to press a key .
18
