6
71
29
8
4_
IN
S
0
41
1_
B
lu
et
oo
th
K
ey
bo
ar
d_
W
x4
.7
5”
H
_O
ut
pu
t:1
00
%
_P
rin
ts
:1
/1
,B
lk
syncing The blueTooTh
®
To your ipad 2 Tablet
1 . Power on your iPad 2 Tablet .
2 . Slide the On/Off switch on the Bluetooth
®
Keyboard Case to “on” .
Both the Bluetooth
®
LED and the power LED illuminators will light up
for a few seconds and then shut off .
3 . Press the Connect button on the Bluetooth
®
Keyboard Case . The Power LED
will illuminate and the Bluetooth
®
LED will flash .
4 . Select the “Settings” icon on your iPad 2 Tablet’s screen .
5 . Locate and select “Bluetooth” in your iPad 2 Tablet
’
s “General” menu .
6 . Under “Devices” on your iPad 2 Tablet, select the Bluetooth
®
Keyboard Case .
7 . The iPad 2 Tablet will now prompt you to enter your computer Bluetooth
®
password
and press either the Return or Enter key using the Bluetooth
®
Keyboard Case .
8 . The iPad 2 Tablet screen should now show the Bluetooth
®
Keyboard Case has
connected successfully .
9 . The Power LED will remain illuminated while the keyboard is powered on .
10 . Slide the On/Off switch to “off” when you are done using the keyboard .
11 . If your iPad 2 Tablet goes into standby mode, the Bluetooth
®
Keyboard Case
should still be synced . If you power-off your iPad 2 Tablet you may need to
re-sync . If you use the Bluetooth
®
Keyboard Case with a new iPad 2 Tablet,
or it doesn’t connect properly, follow the steps above to re-sync .
Note: The Bluetooth
®
Keyboard Case will automatically go into standby mode
after 15 minutes of non-use in order to preserve battery life. Just press any key
to reactivate the keyboard.
