1. Volume may be adjusted on your
audio device or
by pressing and
holding the Volume Down or
Volume Up buttons.
2. A single press of the Volume
Down or Volume Up buttons will
advance to the next track or go
back to the previous track.
3. To pause audio, press the Power
Button on the Swivel Speaker. To
resume audio playback, press the
same button again.
Fold
Fold
Fold
Fold
Fold
LISTENING TO YOUR
AUDIO DEVICE
SPECIFICATIONS
Power Supply: 5V, 1A (Input)
Total Output: 3W
Range: Class 2, up to 33 ft (10 m)
Li-ion Rechargeable Battery: 680mAh
Charging Time: Approx. 4 hours
Battery Life: Approx. 6 hours
Compatibility: Bluetooth
®
2.0 or above
device with A2DP/AVRCP/HFP/HSP
The Bluetooth
®
word mark and logos
are registered trademarks owned of
Bluetooth SIG, Inc. and any use of such
marks by Brookstone is under license.
CARE AND STORAGE
Store the speaker in a cool, dry place.
MOBILE PHONE OPERATION
1. When you have an incoming call,
the speaker sounds an incoming
call tone. Both the speaker and
your mobile phone may ring,
depending on your mobile phone
settings.
2. To answer an incoming call, short
press Power Button to answer the
call.
3. To end a call, short press Power
Button once.
4. When you receive a call, while
music is playing, the song will
pause. After ending the call, the
song will continue from where it
was paused.
RESET
To hard reset the speaker, connect
to the USB cable and plug into a
charging source.
PAIRING YOUR DEVICE
1. Prepare your device to pair using
Bluetooth
®
t
e
chnology, making sure
you are within 33 feet of the
speaker. Refer to your device’s
owners manual for details if
necessary.
2. Turn on the speaker.
3. The LED Indicator will flash BLUE
and the speaker is ready to pair.
4. Once the speaker is in pairing mode
and your device is ready to pair,
select “Swivel Speaker”. If prompted,
use 0000 as a PIN for the
pairing code. Once the speaker is
selected, it will play two tones to
confirm pairing is complete.
NOTE: LED Indicator light will flash
blue when the battery is low.
