Operation & Installation Manual RFP V2 Series
MA225 Rev 1
16 of 50
•
Common alarm output confirmation (delay), 0, 30 and 50 second.
•
003 Key switch to turn the RFP ON / OFF or FIRE mode.
•
Individual zone relay output when the optional zone output card SUB365 is
fitted.
•
Alarm locate facility to identify activated Smoke/Heat Alarm.
•
Ancillary isolate control to isolate the common alarm output.
Figure 4 below shows the front view of the standard 6 zone residential fire panel
RFP6 V2 and Figure 5 shows the front view of the optional 24 LED mimic display.
Figure 4 RFP6V2 Overlay for 6 Zones
Figure 5 Standard Mimic Overlay (Optional)
The RFP12/18 V2 comprises the same components as in RFP6 V2. In addition, a
slave main board SUB350S and a standard termination board SUB357 are added
for every 6 zone, all housed in a larger enclosure. The front view of RFP12/18 V2 is
shown in Figure 6 below.below
