1. Safety
IntelliXcap
General Safety Considerations
Part Number: 319430 Rev. A
General Safety Considerations
Moving parts are subject to pressure and weight. Do not rest a hand on the stage or twist the rack as it may
pull the machine out of position or damage moving parts.
The IntelliXcap should be kept clean at all times, please see
for information on
cleaning requirements.
The IntelliXcap can only be used with tubes and cartridges that have been configured and tested. Do not
use alternative tubes and cartridges that have not been configured and tested.
Untrained or Improperly Equipped Personnel
Untrained or improperly equipped personnel performing this procedure may cause damage to the
equipment.
l
Only Brooks Automation trained personnel should perform this procedure.
l
Personnel performing this procedure must read and understand this procedure and have the proper
tools and supplies ready before starting.
l
Personnel performing this procedure must know the applicable safety codes, facility safety
procedures, safety equipment, and emergency contact information.
Inappropriate Use
Use of this product in a manner or for purposes other than for what it is intended may
cause equipment damage or personal injury.
l
Only use the product for its intended application.
l
Do not modify this product beyond its original design.
l
Always operate this product with the covers in place.
5
Copyright © 2019, Brooks Automation, Inc.
