FT1-SB System Manual
MA370 Iss. 2
7
2.2 Termination and Control Module
The Termination & Control Module of Brooks FT1-SB is shown in Figure 2 below.
Figure 2 FT1-SB Termination & Control Module
The termination and control module to be mounted on a DIN rail at a convenient location within
the switchboard cabinet. The module as shown in Figure 2 above provides the termination point
for all the field wiring and power supply . It is connected to the front display user interface module
via 4 wires, two used to supply 24V
DC
(0V & 24V) and two for communications via RS232 (Rx &
Tx).
