Brooks CTI-Cryogenics, Installation, Operation And Maintenance Instructions

Page: 16 / 82

Compressor Damage
Do not place a weight greater than 75 lbs. (34Kg) on top of
the High Capacity Helium Compressor, or the unit may be
damaged.
Introduction High Capacity Helium Compressor
Specifications Manual
8040600 Brooks Automation
1-6
Revision A
Weight
The weight of the High Capacity Helium Compressor is listed in Table 1-1 .
Electrical
The electrical specifications of the High Capacity Helium Compressor are
listed in
Table 1-2 .
Table 1-1: High Capacity Helium Compressor Weight
Compressor Configuration Weight lbs./kg
Low Voltage 3 Compressor Modules 820/372
High Voltage 3 Compressor Modules 830/376
Low Voltage 2 Compressor Modules 640/290
High Voltage 2 Compressor Modules 650/295
Table 1-2: Electrical Input Specifications
Parameter
Low Voltage
3 Compressor
Modules
High Voltage
3 Compressor
Modules
Low Voltage
2 Compressor
Modules
High Voltage
2 Compressor
Modules
Input Voltage
and Frequency 180-253 VAC
50/60Hz
342-528 VAC 50/60 HZ 180-253 VAC
50/60Hz
342-506 VAC 50/60 HZ
Phase 3 3 3 3
Nominal
Input Power 18 KW @ 60 Hz
15 KW @ 50 Hz 18 KW @ 60 Hz
15 KW @ 50 Hz 12 KW @ 60 Hz
10 KW @ 50 Hz 12 KW @ 60 Hz
10 KW @ 50 Hz
Nominal Power
Factor 0.9 0.85 0.9 0.85
Rated FL/LR
Current 58/255 24/125 (480V 60Hz, 380V 50 Hz)
27/125 (480V 50Hz, 380V 60Hz 39/170 18/83