PFC Operation Manual
2. Safety
Equipment Guidelines
The following guidelines are provided to aid in the use and service of the PFC.
Brooks Automation Technical Support will issue a Technical Support Bulletin (TSB) to notify
the owners of record of any field retrofits.
Contact Brooks Automation Customer Support for information regarding repair and
maintenance service policies, both during the production of the PFC and after production is
discontinued.
Any user-caused damage during integration of the PFC into their equipment is the user’s
responsibility.
Brooks Automation’s responsibility for work performed by Brooks authorized technicians or
for equipment transported or resold by the owner of record is determined on a case-by-case
basis by Brooks Automation Technical Support.
Any parts being returned to Brooks Automation should be packaged according to the
instructions provided with the replacement part. Packing instructions for shipping the PFC
are provided in the Appendix.
Brooks Automation provides training for the Polycold PFC. Only qualified, properly trained
persons should perform any procedures on the PFC. Damage resulting from improperly
performing a procedure or not following cautions is not covered under warranty or service
agreements.
Continued on next page
825160-00 revision B
17
