9
Basic Operation (Cont.)
Phono (Record)
Before starting - Please action the following:
• Remove the stylus protector
• Be sure that the tone arm is being detached from the tone arm rest before
operating and resecured again after-use.
1.
Press FUNCTION button repeatedly until PHONO indicator light is on.
2.
Set the speed selector to the proper position depending on the record to be played.
3.
Place the record on the platter, use the 45 RPM Adaptor if required.
4.
Push the lift lever upward to raise the tone arm from the arm park and then slowely
move it to the record side. The platter will start to rotate.
5.
Place the Lift Lever onto the record player gently, your record will start playing.
Note:
to stop playing, lift up the Tone arm. To continue, place gently back onto
the record.
6.
When the record has finished, the platter will stop rotating.
7.
Make sure to lift Tone arm up and place it back into the Arm park
(where it sat originally when first opening the turntable).
USB Encoding
Before starting - Please action the following:
• Insert USB into the USB slot at front of the unit.
1.
Press FUNCTION button repeatedly until PHONO indicator light is on.
2.
Press the REC button then the PHONO indicator will begin flashing.
3.
To finish encoding (recording), Press the REC button again. The unit will
now switch to USB mode, and play the recorded track.
