11
Don't like what you've created? Make changes, click again, play them again, repeat until satisfied.
6-3.
Scenario 3: How to Configure Lightheads by BlinkCast Programmer
without a Host PC? (mobile / portable mode)
Step 1. Make sure to save the settings to your BlinkCast Programmer
, f
ollow
ing
the instructions in
section
6-2
(p.9-10)
to export the setting item to the desired button on your BlinkCast Programmer.
Step 2.
Wiring and connection.
Follow the instructions in
1-2
(p.3,
②
Save & Burn Mode: Burn) to connect a lighthead, 12V power source and
the BlinkCast Programmer.
Step 3.
Press desired button on BlinkCast Programmer to start burning / saving the setting to said button.
The lighthead will display a short flash to indicate all settings have been burned successfully.
Step 4.
Check setting of each function wire.
Click
to activate the lighthead, providing a visual of the current settings for each function wire.