Brook Power Bay, User Manual

Page: 6 / 29

Press Bluetooth/HDMI switch button to process headset pairing again
before the Bluetooth pairing mode is off. If first headset is successfully
paired, pressing the button will start to pair with second headset.
Please make sure your headset meets Bluetooth SIG standards.
Unqualified headset might affect pairing results with Power-Bay.
Press the Bluetooth/HDMI switch button for 3 seconds then switch
from Bluetooth pairing mode to HDMI audio output mode.
1.Make sure Power-Bay is turned on
with blue LED light.
Connect to headsets by Bluetooth
4.The LED light will stop after 30 seconds if you
don’t pair with second headset.
3.Pairing with headsets by Bluetooth. First headset is
successfully paired then it will automatically continue to
pair with second headset.
2.Press the Bluetooth/HDMI switch button for 3 seconds then
switch to Bluetooth pairing mode. It will flash purple LED light
when the mode is switched.
●Pairing with second headset
●Headset pairing is failed?
●Audio output via HDMI connector in TV mode
03