7
（
4
）
（
7
）
（
8
）
（
9
）
（
5
）
（
6
）
①
②
③
Get circlips on the upper parts
of two guide rods in right
positions; fix guide rods.
Assemble water bottle holder.
Pass steel cable through cord
lock; tighten screws.
①
Tighten the 3 screws as
much as possible.
②
The bolt must make at least
10 turns towards the selector
bar.
③
Tighten hexagon nut.
Assemble the front shroud.
Fasten it to tower with the
designated screws.
Assemble steel cable as the
diagram shows; check whether
pulleys move smoothly.
Assemble the rear shroud.
Fasten it to tower with the
designated screws. Now weight
cage is assembled.
