To replace the belt clip
Slide the belt clip down into the slot until it clicks
into place.
Pull the tab forward(away from the handset)
to release the belt clip. Then lift the belt clip off.
To fit the batteries
When placing the handset in the charge,
use
only Ni-MHrechargeable batteries.
Don't try to recharge the non-rechargeable
batteries.
_
Important read these
Safety Warning before
you charge the batteries
2.Insert three batteries,
position the batteries
according to the polarity
marking on the plastic.
3.Replace the cover.
1.Insert the lower side of the
belt clip into the slot of the
bottom side of the unit.
Then lift the battery door off.
belt clip