BRONDI FX -318, Instruction Manual

Page: 6 / 8

6
3.9 Setting the Roger Beep
The Roger Beep is a tone which is automatically transmitted
whenever the PTT button is released. This alerts the receiving party
to inform that you have intentionally ended the transmission, and you
are now in receive mode.
a. Press the MENU button 10 times, the “ R0” icon will be
displayed while the “ON” icon is blinking on the LCD
screen.
b. Press the UP or DOWN button to select the Roger beep
On/Off.
c. Press the PTT button to confirm your setting.
3.10 Setting the Key Tone ON or OFF
This feature allows the FX-318 to emit a confirmation tone after
pressing each button.
a. Press the MENU button 11 times, the “ T0 ” icon will be
displayed while “ON” icon is blinking on the LCD
screen.
b. Press the UP or DOWN button to select the Key tone
On/Off.
c. Press the PTT button to confirm your setting.
4. Setting the Dual Watch Mode
Your FX-318 is capable of monitoring two channels, the current and
another (dual watch) channel. If the unit detects a signal on either
channel, it will stop and receive the signal.
a. Press the MENU button 12 times, “ DCM ” icon will be
displayed while “
OF
” flashes on the LCD screen.
b. Press the UP or DOWN button to select the Dual Watch
channel (1-8, except the current channel).
c. Continue pressing the MENU button to change the
CTCSS code.
d. Press the UP or DOWN button to select the desired
CTCSS code (1-38).
e. Continue pressing the MENU button to change the DCS
code.
f. Press the PTT button to confirm your setting.
5. Auxiliary Features
5.1 Key Lock
The Key Lock feature allows user to disable the UP ,
DOWN and MENU buttons so that the FX-318 settings
could not be changed accidentally.
a. To activate the Key Lock feature, press and hold the
MENU button until key lock
“ ”
icon appears on the
LCD screen.
b. To deactivate the key Lock feature, press and hold the
MENU button until key lock
“ ”
icon disappears
on the LCD screen.
Note: The PTT, CALL and POWER buttons will remain
functional even if the Key Lock feature is activated.
5.2 Stop watch function
In standby mode, press and hold the CALL button for 3
seconds. The Stop watch icons will appear on the LCD
screen.
a. Press the UP button once to start the Stop watch. To
stop press again the UP button.
b. Press the DOWN button to reset the timer.