6.4 PLUG FUSE REPLACEMENT
The Balance comes with a safety fuse built into the plug head, which helps protect the machine
from any power surges. If the fuse is blown and needs replacing, there is a spare already provided
for you on the plug. If the spare is lost or missing, use only a 125 Volt, 2.5 Amp max fuse.
6 MAINTENANCE (cont.)
WARNING: Always unplug the O2+ Balance/Balance prior to attempting to replace the
fuse. Use only 125 Volt, 2.5 Amp max fuse as a replacement.
1.
Remove spare
fuse housing with
a small “micro
type” screwdriver
(or similar item).
2.
Separate from the
plug head.
3.
Using the same
small screwdriver,
slide open the
fuse compartment
on the plug head
by pushing away
from the cord.
4.
Use the screwdriver
to pop out the old
fuse and replace
with the spare fuse
provided.
5.
Lastly, discard
the blown fuse,
close the fuse
compartment,
and replace spare
fuse holder onto
the plug head.
13
Summary of Contents for BALANCE P400 series
Page 2: ......
Page 59: ...56 ...
Page 60: ...PO Box 470085 San Francisco CA 94147 0085 888 542 3355 brondell com ...
