Broncolor Siros 400 L, Operating Instructions Manual

Page: 14 / 76

13
Please note: if a menu item cannot be selected, the unit does not support this function!
Example: Set a sequence of 15 flashes per release
1) Press the rotary controller (1) to enter the main menu. The menu item last selected will be
displayed. The main display changes from showing the output power to the selected menu item.
2) Turn the rotary controller (1) until you reach the menu item “seq”.
3) Press the rotary controller (1), to confirm this function. The “seq” display begins to blink.
4) Turn the rotary controller (1) until “15” appears in the main display “15”.
5) Confirm this selection by pressing the rotary controller (1). After this confirmation, the unit
switches to its normal state. If the selection is not confirmed within 5 s, the unit switches to its
normal state without changing its setting.
1) 2) 3)
4) 5)