Brompton TESSERA M2, User Manual

Page: 211 / 296

TESSERA - V3.0 | USER M ANUAL - REV B | 13.10 - DYNAM IC CALIBRATION (DYNACAL) USER INTERFACE
211
13.10.5.1 - ZEBRA TOOLS
Dynam ic Calibration allows m uch m ore control over the colour and brightness output of
LED panels. Depending on the achievable "Panel Output Colour Space" on page 207 and
whether or not the Brightness Overdrive ( page 204 ) is being used, the LED panels can be pushed
beyond their lim its.
Fig 13.35 - Zebra Tools: Overbright pixels (left) Out-of-gam ut pixels (right)
The Zebra Tools are designed for highlighting both Overbright and Out-of-gam ut pixels.
Both tools can be enabled / disabled from the DynaCal Interface as well as from the "Global
Colour" on page 181 panel.
Fig 13.36 - Button to enable / disable Zebra Tools from the Global Colour panel
To enable either sim ply click the desired Zebra Tool button, likewise to disable any that is
turned on. Once either Zebra Tool has been enabled, an anim ated striped (zebra) pattern will
show on LED panels over the pixels that have been pushed beyond their lim its.
Each Zebra Tool has a distinct direction to the striped (zebra) pattern, also reflected in their
logos. The Overbright pixel Zebra Tool will show (zebra) stripes oriented diagonally from top
left to bottom right, whereas the Out-of-gam ut pixel Zebra Tool will show (zebra) stripes
oriented diagonally from top right to bottom left, use "Recognising Overbright (left) and Out-of-
gam ut (right) Zebra Tool patterns" on the next page for reference.
N OTE Both Zebra Tools can be active in the sam e area and will show overlapping anim ated
striped patterns.