Brompton TESSERA M2, User Manual

Page: 203 / 296

TESSERA - V3.0 | USER M ANUAL - REV B | 13.10 - DYNAM IC CALIBRATION (DYNACAL) USER INTERFACE
203
13.10 - DYNAMIC CALIBRATION
(DYNACAL) USER INTERFACE
When using LED panels that have been calibrated using "Dynam ic Calibration" on page 59, the
features of the Dynam ic Calibration Interface (DynaCal within the Tessera interface) will becom e
available, as well as other related features, see "PureTone" on page 186 and "Therm aCal" on
page 79.
Fig 13.24 - The Dynam ic Calibration (DynaCal) interface
The features accessible from the Dynam ic Calibration interface (described below) are available
to all Tessera LED Processors that are paired with Dynam ically Calibrated LED panels.
The Dynam ic Calibration interface is designed to quickly m anage the input and output colour
spaces as well as panel brightness, all in one place. To help with this process the "Display
Colour" on page 192 toolbar from the "On-Screen Colour Adjustm ent" on page 190 (OSCA) tool
has been added in the top right corner of the interface to allow test colours to be quickly
displayed on screen. Along side these are the "Zebra Tools" on page 211 designed to show
which pixels are being pushed beyond their capabilities and likely causing a resulting loss of
im age uniform ity.