11
OSR45 can be equipped with one or several possible accessories.
POSSIBLE ACCESSORIES OSR45
The OSR45 has the following available leg lengths:
●
1.80 m (standard)
●
2.25 m
●
2.50 m
●
2.70 m
Longer legs will enable lifting of cargo with higher
overheight, however, this will make each lift more
difficult.
LEG LENGTHS
For spreaders with INRS, a special designed latch is
required on the OSR45, in order to reach higher up.
With this latch, it will still be possible to connect
the OSR45 with standard spreaders using the lifting
lugs.
In order to connect the OSR45 to a spreader, the
spreader needs to be equipped with a spreader lift-
ing lug.
The spreader lifting lug is only designed to lift the
OSR45 itself, as in lifts with locked twistlocks, the
OSR45 will be lifted by the twistlocks.
To simplify maintenance and access of the upper
parts of the OSR45, the storage fixture can be adapt-
ed to also include a platform with rails and ladders.
SERVICE PLATFORM
For spreaders with Twin Twenty Detection System
(TTDS), the OSR45 can be equipped with a special plate
on top helping the TTDS to detect
that there is not empty space during
handling of the OSR45.
TTDS PLATE
The OSR45 can be equipped with
warning stickers.
In addition to the
standard forklift attachment
on the storage frame, a pair
of additional forklift attachment can
be added to the upper frame.
LIFTING LUGS
FORKLIFT ATTACHMENT ON
INRS LATCH
For other spreader models, please contact your
Bromma contact person for further verification on
the exact design.
The platform is especially recommended
for OSR45 with leg lengths
longer than 1.8 m.
STS45 Lifting lug
EH5U Lifting lug
WARNING STRIPES
UPPER FRAME
