10
1300 276 642
bromicrefrigeration.com.au
5. OPERATION
Start-up
• Connect the appliance to the mains power supply, the green indicator (as below picture:
no. 3) should illuminate once successfully connected to power. The appliance will start
working without requiring further operation.
• The temperature adjustment dial (as below picture: no.1) has been pre-set to operate in
freezer mode. There is no need to adjsut the dial unless changing operation mode.
Using the controller
• Adjust the dial (as above picture: no. 1) using hand only or with a coin, to set appliance’s
internal temperature, moving clock-wise to achieve lower internal temperature (up to
-24°C)
.
NOTE: You should only make small adjustment and wait 24 hours to see whether further
adjustment is required.
• The yellow switch (as above picture: no. 2) is used to activate Fast Freezing mode. It can
be used for first time operation, or when fast freezing is required. Turn the Fast Freezing
switch off within 24 hours.
• The green indicator (as above picture: no. 3) indicates valid power supply .
• The red indicator (as above picture: no. 4) indicates an alarm condition when internal
temperature of the appliace is higher than normal. This can happen when the door is left
open or warm products are loaded. The alarm indicator will automatically turn off once
above condition resolved, depending on the situation, this can take upto 24 hours.
Summary of Contents for 3736223
Page 2: ......
