Broderson RT-400-A, Operation And Maintenance Manual

Page: 51 / 93

3-4
OPERATOR INSPECTION AND TEST
An operator, in the course of normal operation, should make certain observations, inspections,
and tests to assure that the unit is ready to perform safely.
Daily:
1. Check levels of engine oil, coolant, and transmission fluid.
2. Check air cleaner intake system for cracks or looseness.
3. Check general condition of tires.
4. Visually inspect for loose pins, bolts, physical damage, and leaks.
5. Check hydraulic hoses, particularly those that flex during crane operation.
6. Check hydraulic oil level.
7. Check fuel level.
8. Check hydraulic filter indicator icon on engine display after running at least twenty minutes.
9. Check foot brake operation. Check for warning icon operation, as shown in brake mainte-
nance section (3-__).
10. Check parking brake operation.
11. Check power steering operation.
12. Observe chassis for normal driving operation.
13. Observe boom operation for normal power, speed, and sequencing.
14. Check load line and hooks for damage.
15. Check condition of sheaves and load line retainers.
16. Check anti-two-block system for proper operation.
17. Check back-up alarm for proper operation.
18. Check operation of all transmission gears, FORWARD, and REVERSE.
19. Clean all glass and check for cracks.
20. Check operation of all warning and safety devices.
21. Check operation of Rated Capacity Limiter according to the RCL Operation Manual (2-__).
22. Check seat switch and emergency stop operation.
23. Check Drum Rotation Indicator.
24.
Cummins QSB 4.5L
Diesel Engine, per engine manual:
a. Check crankcase breather tube.
b. Drain water from diesel fuel filter.
c. Inspect cooling fan.
d. Inspect drive belts.
e. Check air cleaner restriction indicator.